PYRRHIC/Successor TRANSFERS
1 LAYOUT 1a.jpg "HB(AV)1 successor standards/banners")
HB(AV)1 successor standards/banners
Steve has created this lovely set to fit our standards as supplied with the Pyrrhic/Successor command sets.…
1a.jpg "PYR(AV)1 fit the AVS13 shields")
10a.jpg "PYR(AV)10 to fit AVS 14 shields 13mm")
PYR(AV)10 to fit AVS 14 shields 13mm
These are the resized PYR(AV)3 designs that now fit on the AVS 14 13mm shields side to side.…
11a.jpg "PYR(AV)11 to fit AVS14 shields 13mm")
PYR(AV)11 to fit AVS14 shields 13mm
These are the resized PYR(AV)4 designs that now fit on the AVS 14 13mm shields side to side.…
2a.jpg "PYR(AV)2 fit the AVS13 shields")
3a.jpg "PYR(AV)3 fit the AVS13 shields")
4a.jpg "PYR(AV)4 fit the AVS13 shields")
5a.jpg "PYR(AV)5 fit the AVS13 shields")
PYR(AV)5 fit the AVS13 shields
24 shield transfers to fit the AVS13 shield supplied with the pikemen.…
6a.jpg "PYR(AV)6 fit the AVS13 shields")
PYR(AV)6 fit the AVS13 shields
24 shield transfers to fit the AVS13 shield supplied with the pikemen.…
7a.jpg "PYR(AV)7 fit the AVS13 shields")
PYR(AV)7 fit the AVS13 shields
24 shield transfers to fit the AVS13 shield supplied with the pikemen.…
8a.jpg "PYR(AV)8 to fit AVS14 shields 13mm")
PYR(AV)8 to fit AVS14 shields 13mm
This set is an enlarged version of PYR(AV)1, resized to 13mm to fit on the AVS 14 rimless shields from…
9a.jpg "PYR(AV)9 to fit AVS14 shields 13mm")
PYR(AV)9 to fit AVS14 shields 13mm
These are the resized PYR(AV)2 designs that now fit on the AVS 14 13mm shields side to side.…
2.jpg "SUC(GB)2 fit the AVS13 shields")
SUC(GB)2 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
3.jpg "SUC(GB)3 fit the AVS13 shields")
SUC(GB)3 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
4.jpg "SUC(GB)4 fit the AVS13 shields")
SUC(GB)4 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
5.jpg "SUC(GB)5 fit the AVS13 shields")
SUC(GB)5 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
6.jpg "SUC(GB)6 fit the AVS13 shields")
SUC(GB)6 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
7.jpg "SUC(GB)7 fit the AVS13 shields")
SUC(GB)7 fit the AVS13 shields
This sheet was made to fit the Gripping Beast shield but it also fits ours.…
TAR(AV)1 fit the AVS14 shields 13mm
Transfers designed to fit the rimless shield supplied with the Tarentine Phalangites.…
TAR(AV)2 fit the AVS14 shields 13mm
Transfers designed to fit the rimless shield AVS14 supplied with the Tarentine Pikemen.…
0 items
- HB(AV)1 successor standards/banners
- SUC(GB)2 fit the AVS13 shields
- TAR(AV)1 fit the AVS14 shields 13mm
- TAR(AV)2 fit the AVS14 shields 13mm
- PYR(AV)2 fit the AVS13 shields
- SUC(GB)4 fit the AVS13 shields
- SUC(GB)7 fit the AVS13 shields
- PYR(AV)6 fit the AVS13 shields
- PYR(AV)5 fit the AVS13 shields
- PYR(AV)7 fit the AVS13 shields